Most homes never seem to have power points in the right places. Older Brisbane houses were wired when a kettle, a radio and a fridge were the main appliances, so today's TVs, computers, chargers and kitchen gadgets end up on double adaptors and power boards. Worn power points are just as common: loose sockets, cracked faceplates and scorch marks are all signs of a connection that's heating up. Our licensed electricians install new power points where you need them, replace damaged ones, and upgrade old outlets to USB, outdoor or 15 amp outlets.
A power point isn't just a power point any more. Choosing the right outlet for each room makes a home safer and tidier, with fewer adaptors and power boards.
| Power point | Best for | Good to know |
|---|---|---|
| Standard 10 amp double | Most rooms and everyday appliances | Replacing singles with doubles cuts down on adaptors |
| USB-A / USB-C power point | Bedsides, kitchens, home offices | Charges phones and tablets without plug packs, and keeps both 240 V outlets free |
| 15 amp outlet | Larger heaters, portable air conditioners, some workshop tools | Has a wider earth pin. A 15 amp plug won't fit a standard 10 amp outlet |
| Weatherproof outdoor outlet | Patios, pool areas, garages, garden equipment | An IP-rated cover protects it from rain and hose spray |
| Smart / Wi-Fi power point | Lamps, heaters, appliances on a schedule | Switch on or off from your phone or a timer |
New power points
Extra outlets added where you actually use them: behind the TV, at the kitchen bench, in the garage or out on the patio.
Repairs and replacements
Loose, damaged or overheating power points are replaced, and the wiring behind them is checked for heat damage.
Upgrades
Single outlets swapped for doubles, plus USB, 15 amp, outdoor and smart power points.
Fault finding
Dead outlets and nuisance tripping traced back to the cause, whether it's the power point, the circuit or an appliance.
Testing and certification
All new work is tested to the AS/NZS 3000 Wiring Rules and protected by a safety switch, with a certificate of testing and safety on completion.
A split system doesn't plug into a power point. It's hardwired to its own dedicated circuit from the switchboard, with an isolator switch beside the outdoor unit. If a home is already short of outlets or the circuits are overloaded, it's worth sorting out the power points at the same time the air conditioning goes in.
Portable air conditioners and larger heaters are different. They plug in, but they draw a lot of current, and running one through a power board or double adaptor is a common cause of overheated plugs and tripping. Some larger models need a 15 amp outlet. Because we do both the electrical work and the air conditioning, we can plan the circuits, outlets and system together in one visit.
If the wiring behind your power points is old, a rewire may be the better long-term fix.
A straight swap of an existing power point is a quick job. Adding new outlets takes longer, and the price depends on:
Making a list of every power point you'd like added or changed lets us do the whole house in one visit, which usually works out cheaper.
No. In Queensland, replacing or installing a power point is electrical work and must be done by a licensed electrician, even if it looks like a simple swap.
Most often, it's a faulty appliance. Unplug everything on that circuit, reset the safety switch, then plug items back in one at a time. If it trips with nothing plugged in, or you can't find the cause, call us. There may be moisture or a fault in the outlet or wiring.
Usually, yes. In most cases it fits the same wall box, so it's a quick changeover with no new cabling needed.